Siemens SINAMICS G220 - Control Commands for Energy-Saving Mode

14.4.10.4 Control commands for energy-saving mode
Overview
The converter switches to energy-saving mode or back to normal operation, depending on the
control command.
Description of function
The following table contains the control commands for energy-saving mode.
Table 14-15 Control commands energy-saving mode
Command Explanation
Start_Pause Switches to energy-saving mode depending on the pause duration
Start_Pause_with_time_re‐
sponse
Switches to energy-saving mode depending on the pause duration
and also speci󹪝es the transition times in the command response
End_Pause Switches from energy-saving mode to normal operation
Cancels switching from normal operation to energy-saving mode
Functions
14.4PROFINET communication
SINAMICS G220 converter
380 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB