Siemens SINAMICS G220 - Whats New; Standard Scope; Use of Third-Party Products in this Documentation

1.2.3 What's new?
Description
Main additions with respect to Edition 08/2023
• Converter with IP55 or UL type 12 degree of protection
• Braking resistor with IP54 degree of protection
• Option Module OM-IIoT
• Expansion adapter for option modules
• SINAMICS Smart Adapter
• SINAMICS SDI pro 5.5''
• Function description of optimized pulse technique for a reluctance motor
For motor dimension, see Chapter "Encoderless speed control of a synchronous reluctance
motor from standstill (Page517)".
Revisions with respect to Edition 08/2023
• EMC-compliant installation
The changes are described in Chapter "Shielded cables, converter in degree of protection
IP20 (Page86)".
1.2.4 Standard scope
The functions of the system as delivered can only be found in the order documents.
Further functions may be executable in the system, which are not explained in this
documentation. However, there is no entitlement to these functions in the case of a new
delivery or service.
This documentation does not contain all detailed information on all types of the product.
Furthermore, this documentation cannot take into consideration every conceivable type of
installation, operation and service/maintenance.
The machine manufacturer must document any additions or modi󹪝cations they make to the
product themselves.
1.2.5 Use of third-party products in this documentation
This documentation contains recommendations relating to third-party products. Siemens
accepts the fundamental suitability of these third-party products. You can use equivalent
products from other manufacturers.
Siemens does not accept any warranty for the use of third-party products.
Introduction
1.2About this manual
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 19