Siemens SINAMICS G220 - Display Interface Information

13.5.4.2 Display interface information
Overview
Information about the con󹪝guration of the following interfaces is provided in menu "System" >
menu item "Settings" > "Interfaces":
• X127 Service interface
– Accessing the web server via HTTP or HTTPS
The factory setting to access the web server is service interface X127 with HTTPS protocol.
HTTP can also be activated.
– Name of station
– DHCP mode
– IP address
– Subnet mask
– Gateway
– MAC address
• X150 PROFINET interface
– Accessing the web server via HTTPS
To access the web server, PROFINET interface X150 with HTTPS protocol can also be
activated.
– Name of station
– IP address
– Subnet mask
– Gateway
– MAC address
You can 󹪝nd more information about the interfaces in Chapter "Communication interfaces
(Page212)".
Procedure
Figure13-9 Interface information about service interface X127
Operation and monitoring with SINAMICS SDI Standard
13.5Functions
SINAMICS G220 converter
314 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB