Siemens SINAMICS G220 - Memory Card; Memory Card Function; Memory Card Ordering Data

3.6.2 Memory card
3.6.2.1 Memory card function
Description of function
.FNPSZDBSETMPU
Figure3-3 Memory card, slot based on example of converter in degree of protection IP20
The converter supports FAT32-format memory cards with a capacity of up to 32GB.
The converter can be operated with or without a memory card inserted.
A permanently inserted memory card from Siemens is required to use functions that require
a license.
A memory card from Siemens or a third-party manufacturer is suitable for the following
situations:
• Transfer of the converter settings from one converter to another
• Firmware update
3.6.2.2 Memory card ordering data
Memory card (SD card)
Memory card content Article number
empty 6SL5970-0AA00-0AA0
License "Motor Control Extended" 6SL5970-0AA00-0AA0-Z H01
License "Safety Integrated Extended Functions" 6SL5970-0AA00-0AA0-Z F01
Licenses "Motor Control Extended" and "Safety Integrated Ex‐
tended Functions"
6SL5970-0AA00-0AA0-Z H01+F01
Firmware V6.2 6SL4170-1GC00-0AA0
Firmware V6.2 + license "Motor Control Extended" 6SL4170-1GC00-0AA0-Z H01
Description
3.6Optional components
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 47