Siemens SINAMICS G220 - Diagnostics Buffer

Selecting messages
Search Enter a keyword
Filter by date Select a date or time interval
Message types Select the message type that should be displayed:
• All
• Faults
• Alarms
Displaying messages
Type Displaying the message type:
• Alarm
• Fault
Incoming Time that the message was received
Class Assign the message to a message class according to PROFIdrive
The message number is output on all operating units, e.g. PC or SIMATIC
HMI.
Message Speci󹪝cation of the message number with message text
Gone Time when the message went
• Faults are given the status "Outgoing" if the following are true:
– The causes have been eliminated.
– The message has been acknowledged.
Selection for more information:
• Description of the message with cause and remedy
10.5.3.2 Diagnostics bu󹪜er
Overview
Function view "Diagnostics bu󹪜er" provides information about all system-relevant operations,
e.g. commissioning, new ramp-up, generation of a certi󹪝cate.
Commissioning (web server)
10.5Functions and menus
SINAMICS G220 converter
240 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB