Mounting
6
CAUTION
Burns and thermal damage caused by hot surfaces
Temperatures above 100 °C may occur on the surfaces of motors, converters, and other drive
components.
Touching hot surfaces may result in burns. Hot surfaces may damage or destroy temperature
sensitive parts.
• Ensure that temperature-sensitive parts do not come into contact with hot surfaces.
• Mount drive components so that they are not accessible during operation.
Measures when maintenance is required:
• Allow drive components to cool o before starting any work.
• Use appropriate personnel protection equipment, e.g. gloves.
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 129
To Next Page
Loading...
