Siemens SINAMICS G220 - SINAMICS Smart Adapter; Function of the SINAMICS Smart Adapter

Description
The following components can be operated at the converter with option module OM-DQ:
• DRIVE-CLiQ encoder
• SMC20 Sensor Module
Article number 6SL3055-0AA00-5BA3
• SMC30 Sensor Module
Article number 6SL3055-0AA00-5CA2
More information
You can 󹪝nd more information on the Internet:
Equipment Manual (
https://support.industry.siemens.com/cs/ww/en/view/109782370)
The information applies to all converters at which the Sensor Module is operated.
3.6.9 SINAMICS Smart Adapter
3.6.9.1 Function of the SINAMICS Smart Adapter
Description
Figure3-7 SINAMICS Smart Adapter
The SINAMICS Smart Adapter establishes a WLAN connection between the converter's X127
service interface and an operating unit, for example a tablet, smartphone, panel or PC.
Once plugged into the converter, the SINAMICS Smart Adapter is ready to use. No battery is
required.
The SINAMICS Smart Adapter may only be installed temporarily for commissioning and
service activities. It may not be used permanently with the converter.
The SINAMICS Smart Adapter supports WPA3 WLAN encryption.
Description
3.6Optional components
SINAMICS G220 converter
52 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB