Siemens SINAMICS G220 - Installation, Converter in Degree of Protection IP55

6.1.8 Installation, converter in degree of protection IP55
Description
The converter is designed for wall mounting. The mounting surface must be capable of carrying
the weight of the converter and must be adequately stable.
Table 6-8 Rear view of the converter and mounting parts, frame sizes FSB … FSD1, degree of protection IP55
 FSB FSC FSD1
Rear view of the con‐
verter
[mm]





¡





¸






¸



Mounting parts 4 × M5 screws
4 × M5 washers
4 × M6 screws
4 × M6 washers
4 × M6 screws
4 × M6 washers
Tightening torque 6Nm 10Nm 10Nm
Mounting
6.1Converter
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 139