Siemens SINAMICS G220 - Optimization; Advanced Setup

• "Limit values"
The converter limit values are shown graphically and in a tabular form.
The limit values must be con󹪝gured on an application-speci󹪝c basis.
• "I/O con󹪝guration"
The function view o󹪜ers the following con󹪝guration options:
Con󹪝guration Description
Di󹪜erent assignment of command data sets 0
and 1
–
Assign functions to digital inputs/digital outputs
and analog inputs/analog outputs
–
Select I/O presets Changes to the precon󹪝gured I/O presets are dis‐
played with the pre󹪝x [changed].
10.5.1.3 Optimization
Overview
Optimization proceeds once quick setup is complete.
The optimization settings are preset and cannot be adjusted during quick setup. It is possible
to con󹪝gure desired settings as part of advanced setup.
Requirement
You have connected the motor.
Description of function
The optimization process includes motor data identi󹪝cation with stationary motor and starts the
next time the motor is switched on.
10.5.1.4 Advanced setup
Overview
With the advanced setup, you de󹪝ne drive options and functions to suit your application. The
advanced setup contains all settings of the quick setup, plus additional options and functions.
Commissioning (web server)
10.5Functions and menus
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 229