14.4.8 Diagnostics with PROFINET
Overview
The converter provides the diagnostics standardized for PROFINET. This means that faults and
alarms with a component assignment can be output directly to an HMI via the PROFINET
controller.
Description of function
The fault and alarm messages are saved in the converter in parameters.
The converter transfers the messages in the sequence in which they occurred. The control
generates the time stamp when the messages are received.
PROFINET uses channel diagnostics to transfer the PROFIdrive message classes.
Functions
14.4PROFINET communication
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 375
To Next Page
Loading...
