Siemens SINAMICS G220 - Brief Description of the Parameters

14.2 Brief description of the parameters
Overview
The brief parameter description provides the most important information for all of the
parameters that are assigned to a certain converter function.
Description of function
The parameters are classi󹪝ed as follows:
• Adjustable parameters p
• Display parameters r
• Interconnection parameters c
The parameter number is made up of a "p", "r" or "c", followed by the four-digit parameter
number, and optionally the speci󹪝cation of an index or bit.
p/r/cxxxx[x...x] Parameters with indices
p/r/cxxx.x...x Parameters with bit array
p/r/cxxxx[x].x Parameter with index and bit
Table 14-1 Examples of parameter descriptions
Parameters Description
p - adjustable parameters (read and write)
p0300 Adjustable parameter 300
p1213[0...1] Adjustable parameter 1213, indices 0 and 1
p1001[0...n] Adjustable parameter 1001, indices 0 to n (n = con󹪝gurable)
p1070[1] Adjustable parameter 1070, index 1
p0795.4 Adjustable parameter 795, bit 4
r- display parameters (read only)
r0020 Display parameter 20
r0052.0...15 Display parameter 52 with bit array from bit 0 (lowest bit) to bit 15
(highest bit)
p2089[1].3 Display parameter 2089, index 1, bit 3
c - interconnection parameters
c0840[0] Interconnection parameter 840, index 0
Functions
14.2Brief description of the parameters
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 323