The drive information displayed is preset in the factory setting, and when required, can be
adapted using symbol . If user management is active, the "Edit web server conguration"
right is required in order to make changes.
Values are indicated as follows:
• Factory setting: 8 values are displayed
• It is possible to display all values completely
The drive status is displayed as follows:
• : Individual values are continuously displayed
• : Individual values and trend diagrams are continuously displayed
10.5.2.2 Inputs/outputs
Overview
The function view "Inputs/outputs" shows the status of all inputs and outputs.
Commissioning (web server)
10.5Functions and menus
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 237
To Next Page
Loading...
