Siemens SINAMICS G220 - Security Settings

11.6 Security settings
Description
Multi-level security functionality is available for SINAMICS drives in the TIA Portal application
"Startdrive".
• Security default settings for the projects
With the TIA Portal, you make overarching default security settings across the complete
project.
• Security settings for the drive
You make speci󹪝c protection settings for the selected drive in the Inspector window.
• Security Wizard
With the help of the wizard, you make the fundamental settings for the drive as soon as it is
created in the Startdrive project. The wizard uses important basic settings from the user
management system (e.g. roles and rights) for this purpose.
• User Management and Access Control (UMAC):
With user management, you can activate project protection for Startdrive projects. Further,
as an "Administrator" you specify the general roles and rights in user management and
manage the individual user accounts. Users can then only access the project in Startdrive by
logging in. The drive can also be provided with protection. If the drive is protected, a login is
also always required for online access to it. The drive protection (runtime) can also only be
deactivated by a complete reset to factory settings using an SD card.
• Secure communication with Trusted Devices
Connections between the operating unit and drives must be secure. By accepting
certi󹪝cates in secure connections, you classify drives as "Trusted Devices".
More information
You can 󹪝nd more information on the Internet:
Industrial Cybersecurity Con󹪝guration Manual (
https://
support.industry.siemens.com/cs/ww/en/view/109810578)
Commissioning (Startdrive)
11.6Security settings
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 291