Siemens SINAMICS G220 - Status Bar

The table below shows examples of actions that have to be con󹪝rmed using the "ESC" key or
the "OK" key.
Table 13-3 Examples of actions
Icons Description
Brie󹪞y press ESC key → focus change to navigation bar
• Brie󹪞y press ESC key → navigate back to next level up
• Press ESC for 2s → focus change to displayed navigation bar (from level 2), fast
selection
Press "OK" key → con󹪝rm selection
Press "OK" key → edit selection
Press "OK" key → navigate to next level down
The icons in the footer are shown with di󹪜erent background colors.
Table 13-4 Footer background color
Color Description
gray
Standard color 
blue
Use in dialogs 
Red
Fault present
Displayed in "Messages" dialog entry
Procedure
• The converter has a fault.
• SINAMICS SDI Standard is activated, the
backlight is switched on.
• Display: "Messages" dialog entry
13.4.3 Status bar
Description
The following table shows selected status bar icons.
Table 13-5 Status bar icons, converter is ready for operation
Icons Description
Motor running
Manual mode, continuous operation
Manual mode, jog mode
Manual mode via remote access
Commissioning
Operation and monitoring with SINAMICS SDI Standard
13.4Icons
SINAMICS G220 converter
306 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB