Siemens SINAMICS G220 - Interfaces for the Controller; Overview of Interfaces, Converter in Degree of Protection IP20

7.2 Interfaces for the controller
7.2.1 Overview of interfaces, converter in degree of protection IP20
Description
With the exception of the 󹪝eldbus connection, the interfaces for the control and the service
interface are located behind a cover. The cover comprises 2 parts:
• Frame size FSA: Front cover and front 󹪞ap
• For converters larger than frame size FSA: Front door and front 󹪞ap









 Termi‐
nal strip
Designation  Termi‐
nal strip
Designation
① X1xx Communications module
with 󹪝eldbus connection
⑥ --- Front cover or front door
② --- Front 󹪞ap ⑦

X133 Digital outputs
③ X124 External power supply ⑧ X132 Analog inputs, analog outputs, and
temperature sensors
④ X130 Failsafe digital input, failsafe
digital output
⑨ X127 Service interface for connecting an
operating unit
⑤ X131 Digital inputs   
Figure7-13 Interfaces for the controller, converter with degree of protection IP20
Connecting
7.2Interfaces for the controller
SINAMICS G220 converter
176 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB