Siemens SINAMICS G220 - Inputs;Outputs; Default Settings for Inputs;Outputs; I;O Presetting Conveyor Systems with 4 Fixed Setpoints

14.8 Inputs/outputs
14.8.1 Default settings for inputs/outputs
14.8.1.1 I/O presetting "Conveyor systems with 4 󹪝xed setpoints"
Overview
In order to avoid having to successively change terminal by terminal, multiple terminals can be
set jointly with one operating unit.
With the I/O preset "Conveyor systems with 4 󹪝xed setpoints", the converter is prepared for a
typical conveyor technology application.
Requirement
The preset can only be changed using the Startdrive commissioning tool or the web server.
The converter only accepts the default setting if one of the following con󹪝gurations is set for
the 󹪝eldbus telegram:
• Con󹪝gurable telegram 999
• No telegram
Functions
14.8Inputs/outputs
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 417