Siemens SINAMICS G220 - Power, Input Current, Output Current; 3 Ac

17.3 Power, input current, output current
17.3.1 200 … 240 V3AC
Technical data
The rated converter power is the mechanical shaft power of a typical 8-pole induction motor,
which can be operated at the converter at its rated operating point without overloading the
converter.
Table 17-7 Power and currents
Property


Unit Article number: 6SL4112-...☐☐-..F0
05 06 08 10 11 12 13
Rated power at 230V With low
overload
kW 0.55 0.75 1.1 1.5 2.2 3.0 4.0
With high
overload
kW 0.37 0.55 0.75 1.1 1.5 2.2 3.0
Rated power at 240V With low
overload
hp 0.75 1.0 1.5 2.0 3.0 4.0 5.0
With high
overload
hp 0.5 0.75 1.0 1.5 2.0 3.0 4.0
Input current at 230V With low
overload
A 3.2 3.9 5.4 7.1 10.1 13.1 17.7
With high
overload
A 2.6 3.5 4.3 6.0 8.6 10.9 14.9
Output current at 230V Without
overload
A 4.1 4.9 6.7 8.8 11.3 14.9 19.5
With low
overload
A 3.9 4.7 6.5 8.5 11.0 14.5 19.0
With high
overload
A 2.9 3.9 4.7 6.5 8.5 11.0 14.5
Input current at 240V With low
overload
A 3.0 3.7 5.1 6.4 9.3 11.9 14.7
With high
overload
A 2.3 3.1 4.0 6.2 7.3 10.1 13.2
Output current at 240V Without
overload
A 3.3 4.4 6.2 7.0 9.9 12.8 15.6
With low
overload
A 3.2 4.2 6.0 6.8 9.6 12.4 15.2
With high
overload
A 2.2 3.2 4.2 6.0 6.8 9.6 12.4
Technical data
17.3Power, input current, output current
SINAMICS G220 converter
802 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB