Siemens SINAMICS G220 - Send Data

14.4.6.21 Send data
Overview
The converter receives the send data of the set telegram from signal sinks designated for that
purpose.
Requirement
You have activated communication via 󹪝eldbus and set a telegram.
Description of function
The send data is available in the converter in "Word" format (p2051) and "Double word" format
(p2061). The converter automatically interconnects parameters p2051 and p2061 with the
signals that are suitable for the telegram.
1;%TFOEXPSE
1;%TFOEXPSE
1;%TFOEXPSE
1;%TFOEXPSE
1;%TFOEXPSE
D<>
D<>
D<>
D<>
D<>
D<>
D<>
D<>
D<>
D<>
Figure14-24 Interconnection of send data
Parameters
The following list contains the parameters of the "Send data" function.
Number Name Unit
r0922 PROFIdrive PZD telegram 
c2053[0...31] PROFIdrive PZD send word 
c2063[0...30] PROFIdrive PZD send double word 
Functions
14.4PROFINET communication
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 367