Siemens SINAMICS G220 - Dynamic Braking

Parameters
The following list contains the parameters of the "Compound braking" function.
Number Name Unit
r1282 Vdc_max controller switch-in level (U/f) [V]
r1282 Vdc_max controller switch-in level (U/f) [V]
p3856[0...n] Compound braking current [%]
r3859.0...1 Compound braking/DC quantity control status word 
14.11.10 Dynamic braking
Overview
With the help of dynamic braking, the converter brakes the motor without causing an additional
temperature rise in the motor. An external braking resistor converts the braking energy of the
motor into heat.
Requirement
Converter with the number "0" at the 8th position of the Article number: 6SL4113-0…
Description of function
&Ȍ

+O

O
O
U

_

_
Figure14-190 Power 󹪞ow during dynamic braking
The braking resistor converts the regenerative energy E generated when the motor brakes
into heat in a braking resistor.
Functions
14.11Drive functions
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 603