Siemens SINAMICS G220 - Change the Direction of Rotation of the Motor Shaft; System Menu; Saving the Changes in the Converter

13.5.3.3 Change the direction of rotation of the motor shaft
Overview
You change the motor direction of rotation in menu "Operation and monitoring" > "Rotation
direction".
Procedure
Figure13-7 Changing the direction of rotation of the motor
Proceed as follows to change the direction of rotation of the motor:
1. In the navigation bar, navigate to the "Operation and monitoring" menu.
Con󹪝rm the selection using the "OK" key.
2. Select the "Direction of rotation" menu item.
Con󹪝rm the selection using the "OK" key.
3. Select the direction of rotation for the motor:
– Right
OR
– Left
13.5.4 "System" menu
13.5.4.1 Saving the changes in the converter
Overview
In menu "System" > menu item "Settings" >"Web server", specify whether you wish to
automatically save changes in the converter.
Operation and monitoring with SINAMICS SDI Standard
13.5Functions
SINAMICS G220 converter
312 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB