Siemens SINAMICS G220 - 17 Technical Data; General Technical Specifications

Technical data
17
17.1 General technical speci󹪝cations
Technical data
Table 17-1 General data of the converter
Property Value
Line voltage 3 AC200V…240V +10%‑20%
3 AC380V…415V +10%‑20%
3 AC440V…500V +10%‑20%
Input frequency 50/60Hz (47…63Hz)
Output voltage 3 AC 0V … line voltage
Output frequency 0…550 Hz
Power factor λ 0.9 typical
O󹪜set factor cos φ 0.98 typical
Pulse frequency 4kHz (factory setting)
The pulse frequency can be set in the range 2…16kHz.
Type of cooling Air cooling using an integrated fan
Degree of pollution 2 according to IEC 61800-5-1
Overvoltage category III according to IEC 61800-5-1
Flicker The 󹪞icker value of the converter depends on the line supply and the speci󹪝c
converter application. This means that the 󹪞icker value can only be measured
when the converter is operational in the installation.
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 799