Siemens SINAMICS G220 - Current Derating Depending on the Pulse Frequency

17.7 Current derating depending on the pulse frequency
Technical data
The following diagram shows the relationship between the pulse frequency and the relative
output current.
The relative output current is the quotient of the permissible output current and the rated
output current.
1VMTFGSFRVFODZ<L)[>
3FMBUJWFPVUQVU
DVSSFOU<>








Figure17-6 Current reduction based on Low Overload
Technical data
17.7Current derating depending on the pulse frequency
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 813