Siemens SINAMICS G220 - Faults and Alarms

15.4 Faults and alarms
De󹪝nitions
A message comprises a letter followed by the relevant number.
The letters have the following meaning:
• A means "Alarm"
• F means "Fault"
• N means "No message" or "Internal message"
• C means "Safety message"
In the delivery state (p3117 =0), safety messages correspond to message type "C" and the
safety message bu󹪜er is active. With p3117 = 1, safety messages correspond to the message
types "A" or "F". Therefore search for Safety Integrated messages in this list only by their
number without the message type (e.g. 01711).
Detailed examples:
Axxxxx Alarm xxxxx
Fxxxxx Fault xxxxx
Nxxxxx No message
Cxxxxx Safety message (dedicated message bu󹪜er)
System messages
15.4Faults and alarms
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 743