Siemens SINAMICS G220 - Optional Components; Braking Resistor; Function of the Braking Resistor; Order Data for Braking Resistor, Degree of Protection IP21

3.6 Optional components
3.6.1 Braking resistor
3.6.1.1 Function of the braking resistor
Description
When the motor is in regenerative mode, the braking resistor converts the braking energy of the
motor into heat. This enables the converter to actively and dynamically brake the motor and the
load machine attached to the motor.
Because the braking resistor heats up strongly during braking, the braking resistor is only
suitable for short-duration braking operations.
To prevent overheating of the braking resistor, the converter must monitor the temperature
of the resistor:
• Monitoring of the temperature switch in the braking resistor
• Additionally, optional activation of temperature monitoring using a thermal model in the
software
3.6.1.2 Order data for braking resistor, degree of protection IP21
Table 3-3 Order data, line voltage 3 AC 200 ... 240V
Rated power of the converter Braking resistor
0.55kW … 2.2kW JJY:023151720007
3kW … 4kW JJY:023163720018
5.5kW … 7.5kW JJY:023433720001
11kW … 18.5kW JJY:023422620002
22kW … 30kW JJY:023423320001
Table 3-4 Order data, line voltage 3 AC 380 ... 480 V/500 V
Rated power of the converter Braking resistor
1.1kW … 1.5kW 6SL3201-0BE14-3AA0
2.2kW … 4kW 6SL3201-0BE21-0AA0
5.5kW … 7.5kW 6SL3201-0BE21-8AA0
11kW ... 15kW 6SL3201-0BE23-8AA0
18.5kW ... 22kW JJY:023422620001
30kW ... 37kW JJY:023424020001
45kW ... 55kW JJY:023434020001
Description
3.6Optional components
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 45