Siemens SINAMICS G220 - Braking Resistor; Mounting Position; Weight, Braking Resistor in Degree of Protection IP21

6.2 Braking resistor
6.2.1 Mounting position
Requirement
NOTICE
Overheating due to impermissible mounting position
The braking resistor can overheat and therefore be damaged if mounted in an impermissible
position.
• Only mount the braking resistor in a permissible position.
Description
Mounting in a horizontal position or in a vertical position with the connections at the bottom
is permissible.
Mounting with the connections at the top or mounted on a ceiling is not permissible.
6.2.2 Weight, braking resistor in degree of protection IP21
Technical data
Table 6-10 Weight, line voltage 3 AC200...240V
Braking resistor
Article number Unit Weight
JJY:023151720007 kg 0.7
JJY:023163720018 kg 1.1
JJY:023433720001 kg 2.0
JJY:023422620002 kg 7.0
JJY:023423320001 kg 8.5
Mounting
6.2Braking resistor
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 141