Siemens SINAMICS G220 - Firmware Updates and Constraints; Open-Source Software (OSS)

Products without protective enclosure (IP00 or IP20) are intended for installation in control
panels or control cabinets that provide the required level of protection.
Any other use that is not expressly permitted can result in malfunctions and unpredictable
hazards.
1.5.2 Firmware updates and constraints
Description
Firmware updates and constraints for the converters with the current 󹪝rmware are available in
SIOS:
Updates and constraints, SINAMICS G220 (
https://support.industry.siemens.com/cs/ww/en/
view/109807094)
1.5.3 Open-source software (OSS)
Description
The license conditions and copyright information of the open-source software components
used by the device are saved on the device itself. You can download license and copyright
information onto your PC via the support page of the integrated web server.
Introduction
1.5Important product information
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 25