Siemens SINAMICS G220 - Downloading the License File at a Later Time; Transferring the License File to the Converter and Activating It

7. To start the assignment, click "Assign".
The progress indicator shows the "Generate license key" step.
The licenses are assigned to the speci󹪝ed memory card.
The license 󹪝le is displayed and is available to download.
8. Download the license 󹪝le to the KEYS/SINAMICS directory of your operating unit.
Result
The license 󹪝le is stored in the KEYS/SINAMICS directory of your operating unit.
14.14.5 Downloading the license 󹪝le at a later time
Requirement
The license 󹪝le has already been created in the Web License Manager.
Procedure
To display the license 󹪝le so you can download it, proceed as follows:
1. Call the following link: Web License Manager (
http://www.siemens.com/automation/
license).
2. In the navigation, click the "Display license key" option in the "User menu".
3. Enter the serial number of the memory card you are using in the "Hardware serial number"
󹪝eld.
OR
In the "License number" 󹪝eld, enter your license number.
4. Click the "Display license key" button.
The license 󹪝le is displayed and is available to download.
5. Download the license 󹪝le to the KEYS/SINAMICS directory of your operating unit.
Result
The license 󹪝le is stored in the KEYS/SINAMICS directory of your operating unit.
14.14.6 Transferring the license 󹪝le to the converter and activating it
Overview
Check the license status for the converter at the license overview page. All functions that require
licensing for the converter are listed in a table. The table also shows which functions are enabled
and whether licenses are missing for individual functions.
Functions
14.14Functions that require licensing
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 731