Siemens SINAMICS G220 - Setting the Display; Change Language

3. Select the "Date and time" menu item.
Con󹪝rm the selection using the "OK" key.
4. Select the desired item to change the date/time.
Con󹪝rm the selection using the "OK" key.
5. Change the speci󹪝cation.
Con󹪝rm using the "OK" key.
13.5.4.4 Setting the display
Overview
You change the following settings in the "System" menu > "Settings" menu item > "Display":
• Lighting dur.
• Brightness
Procedure
Figure13-11 Changing the display settings
Proceed as follows to change the display settings:
1. In the navigation bar, navigate to the "System" menu.
Con󹪝rm the selection using the "OK" key.
2. Select the "Settings" menu item.
Con󹪝rm the selection using the "OK" key.
3. Select the "Display" menu item.
Con󹪝rm the selection using the "OK" key.
4. Select the desired setting that you want to change.
Con󹪝rm the selection using the "OK" key.
5. Change the speci󹪝cation.
Con󹪝rm using the "OK" key.
13.5.4.5 Change language
Overview
The default language for SINAMICS SDI Standard is "English".
Operation and monitoring with SINAMICS SDI Standard
13.5Functions
SINAMICS G220 converter
316 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB