Siemens SINAMICS G220 - Mounting Option Module OM-SMT, Converter in Degree of Protection IP20

Result
The expansion adapter for option modules has been mounted.
5.7.4 Mounting option module OM-SMT, converter in degree of protection IP20
Overview
Option module OM-SMT is mounted in the option slot of the converter.
Requirement
NOTICE
Damage to the option module by withdrawing and inserting under voltage (hot
swapping)
Withdrawing and inserting the option module when the power supply is switched on can
damage the option module or cause the option module to malfunction.
• Switch o󹪜 the converter power supply before you withdraw or insert the option module.
You will need a T20 torx screwdriver
Installation
5.7Option modules
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 113