Siemens SINAMICS G220 - Overview of the Interfaces at Option Module OM-DQ; Option Module OM-DQ, X501 and X502

7.2.20 Overview of the interfaces at option module OM-DQ
Overview image
The two DRIVE-CLiQ interfaces for connection to DRIVE-CLiQ-compatible components are
located on the underside of option module OM-DQ.



1 Internal interface (input)
2 DRIVE-CLiQ interface 1 (X501) (RJ45 socket)
3 DRIVE-CLiQ interface 2 (X502) (RJ45 socket)
Figure7-33 Option module OM-DQ
The internal interface of the option module connects the option module to the converter.
7.2.21 Option module OM-DQ, X501 and X502
Overview
Option module OM-DQ has two DRIVE-CLiQ interfaces.
Connecting
7.2Interfaces for the controller
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 201