Siemens SINAMICS G220 - Setpoint Channel; Main Setpoint

14.9 Setpoint channel
14.9.1 Main setpoint
Overview
The main setpoint speci󹪝es the speed of the motor.
Description of function
The converter receives its main setpoint via one of the following setpoint sources:
• Fieldbus interface of the converter
• Analog input of the converter
• Motorized potentiometer emulated in the converter
• Fixed setpoints stored in the converter
• Measuring probe: The converter converts a sequence of pulse signals at the digital input to
an analog value.
0HDVXULQJSUREH
6HWSRLQWV
6HWSRLQWSURFHVVLQJ
/RZHU
)L[HGVHWSRLQWV
0RWRUL]HGSRWHQWLRPHWHU
5DLVH
0DLQ
VHWSRLQW
PLQ
0
Figure14-47 Setpoint sources of the converter
Functions
14.9Setpoint channel
SINAMICS G220 converter
436 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB