Siemens SINAMICS G220 - Overview of the Interfaces at Option Module OM-SMT; Option Module OM-SMT, X230

7.2.16 Overview of the interfaces at option module OM-SMT
Overview image



1 X500 internal interface (input)
2 X230 interface for PTC temperature sensor
3 X501 internal interface (output)
Figure7-30 Option module OM-SMT
The internal interfaces of the option module connect the option module to the converter or
with other option modules.
7.2.17 Option module OM-SMT, X230
Overview
The OM-SMT interface is designed for connecting two temperature sensors.
Connecting
7.2Interfaces for the controller
SINAMICS G220 converter
196 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB