Siemens SINAMICS G220 - Content Area

Icons Description
Commissioning via remote access
Unsaved changes
Service mode
Alarm
Standby
Motor will enter standby shortly
The icons in the status bar are shown with di󹪜erent background colors. The colors indicate
the converter status.
Table 13-6 Status bar background color
Color Description
Green
Converter is ready for operation. Motor is running or ready for operation.
gray
Converter is not ready for operation.
Cause: Missing control signals in the con‐
verter sequential control are preventing the
motor from starting.
The motor is not running or cannot be star‐
ted.
Red
Converter is not ready for operation.
Cause: Fault present
The motor is not running or cannot be star‐
ted.
Exception:
ESM is active and fault occurs.
In this case, the motor is running.
13.4.4 Content area
Description
The following table shows selected content area icons.
Table 13-7 Content area icons
Icons Description
Acknowledge all messages
Show historical faults and alarms in the "Messages" list
Hide historical faults and alarms in the "Messages" list
Scan code
Information
Go to
Clockwise direction of rotation
Counterclockwise direction of rotation
Operation and monitoring with SINAMICS SDI Standard
13.4Icons
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 307