Siemens SINAMICS G220 - Option Module OM-Iiot; Option Module OM-DQ

Property Value
Max. delay time
2)
Motor temperature or internal error
Short-circuit or wire break

300ms
1s
Max. current consumption (at 24 V DC) 0.15 A
1)
Switching thresholds for overtemperature and switching back are dependent on the number of sensors
connected in series based on the TNF (nominal response temperature) of the sensors.
Sensors = PTC Type A according to IEC 60947-8; DIN VDE V 0898-1-401
2)
Response time of a type A PTC sensor:
Response time according to DIN VDE V 0898-1-401 basis version ≤10s,small version ≤5s
17.13.2 Option module OM-IIoT
Technical data
Table 17-26 Technical data option module OM-IIoT
Property Value
Maximum transmission rate 100Mbit/s
Max. current consumption (at 24 V DC) 0.30 A
17.13.3 Option module OM-DQ
Technical data
Table 17-27 Technical data option module OM-DQ
Property Value
Max. current consumption (at 24 V DC) 0.75 A
Transfer rate 100 Mbit/s
Technical data
17.13Option modules
SINAMICS G220 converter
826 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB