Siemens SINAMICS G220 - SINAMICS SDI Standard, Converter in Degree of Protection IP55

13.2 SINAMICS SDI Standard, converter in degree of protection IP55
Precondition
CAUTION
Burns resulting from high surface temperatures
When the converter is operational, the surface of the SINAMICS SDI Standard operator panel
can reach temperatures exceeding 60 °C. Surface temperatures exceeding 60 °C can result in
light burns.
• If required, wear a glove when operating the SINAMICS SDI Standard.
Description

① SINAMICS SDI Standard
Figure13-2 SINAMICS SDI Standard
The SINAMICS SDI operator panel (Smart Drive Interface) Standard is located behind the front
door of the converter.
Operation and monitoring with SINAMICS SDI Standard
13.2SINAMICS SDI Standard, converter in degree of protection IP55
SINAMICS G220 converter
302 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB