Siemens SINAMICS G220 - TCP;IP Interfacing Object Class

Attrib‐
ute ID
Service
1)
Type Name Value/explanation
4 get UINT16 Open Other Rejects Counters
5 get UINT16 Close Requests Counters
6 get UINT16 Close Format Rejects Counters
7 get UINT16 Close Other Rejects Counters
8 get UINT16 Timeouts Number of bus errors
1)
Supported services: Get attribute single, get attribute all
14.6.4.3 "TCP/IP interfacing object" class
Overview
The "TCP/IP interfacing object" class enables con󹪝guration of the Ethernet interface.
Description of function
The "TCP/IP interfacing object" has object class F5hex.
Table 14-53 Class attributes
Attrib‐
ute ID
Service
1)
Type Name
1 get UINT16 Revision
2 get UINT16 Maximum instance
3 get UINT16 Number of instances
1)
Supported services: Get attribute all, get attribute single
Table 14-54 Instance attributes
Attrib‐
ute ID
Service
1)
Type Name Value/explanation
1 get UNIT32 Status Fixed value: 1 hex
1: Con󹪝guration acknowledged,
by DHCP or saved values
2 get UNIT32 Con󹪝guration Capability Fixed value: 94 hex
4 hex: DHCP supported,
10 hex: Con󹪝guration can be ad‐
justed,
80 hex: ACD-capable
3 get, set UNIT32 Con󹪝guration Control 1 hex: Saved values
3 hex: DHCP
Functions
14.6Ethernet/IP communication
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 405