Siemens SINAMICS G220 - Ac 200

Article number Rated power IEC NEC
6SL4113-...☐☐-..
F0
@ 400V, 50Hz @ 480V, 60Hz
Un󹪝ltered Filtered Un󹪝ltered Filtered
12 3kW 165 170 131 133
13 4kW 216 224 161 165
15 5.5kW 238 244 206 210
16 7.5kW 314 224 255 261
17 11kW 406 420 340 348
18 15kW 534 555 441 455
20 18.5kW 562 564 508 510
21 22kW 662 665 608 610
23 30kW 888 899 765 772
24 37kW 1105 1119 992 1003
26 45kW 1227 1246 1104 1118
27 55kW 1604 1634 1428 1450
1)
The operating point (90/100) means: relative motor stator frequency 90%, relative torque current 100%
Power loss was measured at a pulse frequency of 4kHz and with space-vector modulation.
17.9.3 3 AC 200 ... 240 V, degree of protection IP55
Technical data
Table 17-18 Absolute power loss in W at operating point (90/100)
1)
Article number Rated power IEC NEC
6SL4112-...☐☐-..F0 @ 230V, 50Hz @ 240V, 60Hz
08 1.1kW 108 101
10 1.5kW 135 111
11 2.2kW 167 149
12 3kW 215 186
13 4kW 290 225
15 5.5kW 401 328
16 7.5kW 530 429
17 11kW 675 522
18 15kW 980 692
20 18.5kW 1059 933
21 22kW 1308 1011
23 30kW 1543 1405
1)
The operating point (90/100) means: relative motor stator frequency 90%, relative torque current 100%
Power loss was measured at a pulse frequency of 4kHz and with space-vector modulation.
Technical data
17.9Power loss
SINAMICS G220 converter
816 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB