Siemens SINAMICS G220 - Restoring Drive Data from an Unencrypted Backup File

10.5.5.4 Restoring drive data from an unencrypted backup 󹪝le
Requirement
Requirements:
• An unencrypted backup 󹪝le of the converter is available on the operating unit.
• You have the rights required for active user management (UMAC):
– "Create backup or load drive data to Startdrive"
– If Safety Integrated is contained in the backup 󹪝le, the "Edit Safety Integrated application"
right is required.
Procedure
To restore the drive data for the converter, proceed as follows:
1. Call the "Backup and restore" menu.
2. Navigate to the "Restore drive data from backup 󹪝le" area.
3. Use the "Click to select 󹪝le, or drag and drop 󹪝le here" button to select the backup 󹪝le.
4. The next steps depend on the use case:
Commissioning (web server)
10.5Functions and menus
SINAMICS G220 converter
256 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB