Siemens SINAMICS G220 - Page 259

• Use case 1: A drive password has not been con󹪝gured as function "Drive data encryption" has
not been activated.
1 2 3
$SFBUFCBDLVQ꫼MF3FTUPSFESJWFEBUB
$POWFSUFS"$POWFSUFS"$POWFSUFS"
୫$IBOHFQBSBNFUFS
WBMVFT
– Press the "Restore" button.
– The converter takes the drive data from the backup 󹪝le.
The settings at the time of the backup are restored.
• Use case 2: A drive password is con󹪝gured after the backup 󹪝le has been created.
1
2
3
$SFBUFCBDLVQ꫼MF3FTUPSFESJWFEBUB
$PO꫼HVSFEESJWFQBTTXPSE
$POWFSUFS"$POWFSUFS"$POWFSUFS"
୫$IBOHFQBSBNFUFS
WBMVFT
୫"DUJWBUFFODSZQUJPO



– Press the "Restore" button.
– Enter the drive password.
– The converter takes the drive data from the backup 󹪝le.
The settings at the time of the backup are restored.
Function "Drive data encryption" is activated.
The drive password is still e󹪜ective in the converter after data has been restored.
Commissioning (web server)
10.5Functions and menus
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 257