Siemens SINAMICS G220 - Shield Plates for Converter with IP20 Degree of Protection; Mount the Upper Shield Plates

5.5 Shield plates for converter with IP20 degree of protection
5.5.1 Mount the upper shield plates
Requirement
To mount the upper shield plates, you will need this screwdriver:
• Pozidrive or slotted screwdriver for frame sizes FSA … FSC
• T25 torx screwdriver from frame size FSD1
Procedure
The converter of frame size FSA ... FSC has only 1 upper shield plate for the 󹪝eldbus cable.
The converter of frame size FSD1 and larger has 2 upper shield plates:
• One shield plate for the 󹪝eldbus cable
• One shield plate for the power cables
Tightening torque for frame sizes FSA…FSC: 2Nm 
Tightening torque for frame size FSD1 or larger: 3Nm 
Figure5-1 Mounting the upper shield plates (frame sizeFSD1 in this example)
Installation
5.5Shield plates for converter with IP20 degree of protection
SINAMICS G220 converter
100 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB