Siemens SINAMICS G220 - Status Word and Control Word

10.5.3.6 Status word and control word
Overview
The function view "Control/status word" provides information about the current status of the
sequence control system.
Description of function
Figure10-16 Control and status word
The control and status word is indicated by all sequence control states. This also includes
states that are not available, which prevent the motor from being switched on and switched
o󹪜. Diagnostics supports fault analysis.
Commissioning (web server)
10.5Functions and menus
SINAMICS G220 converter
246 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB