Siemens SINAMICS G220 - Option Module OM-Iiot; Option Module OM-DQ

Option module OM-SMT monitors the temperature of motors via connected PTC temperature
sensors. Option module OM-SMT also detects short circuits and line breaks in the connecting
cables.
Option module OM-SMT is certi󹪝ed according to ATEX (guideline 2014/34/EU) and UKEX
(UKSI 2016 No. 1107) according to EN 50495 and IEC 61800-5-2.
3.6.4 Option module OM-IIoT
Overview
Option module OM-IIoT extends the functional scope of the converter.
Option module OM-IIoT allows the converter to access the Industrial Internet of Things (IIoT).
Requirement
An external 24V power supply at converter terminal strip X124 is required to operate option
module OM-IIoT.
Description
Figure3-5 Option module OM-IIoT
The Ethernet interface of option module OM-IIoT connects the converter with an edge device.
3.6.5 Option module OM-DQ
Overview
Option module OM-DQ extends the functional scope of the converter.
Description
3.6Optional components
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 49