Description of function
Insucient licensing is indicated as follows on the converter:
• A13002 licensing not sucient in operation
Possible cause:
• The memory card is defective or was removed.
• Functions requiring licensing were activated during operation and the licensing is not
sucient.
Possible consequence:
• If the cause is not eliminated, fault F13000 is output automatically at the next restart. The
function that requires licensing can no longer be used.
14.14.4 Creating and downloading the license le
Requirement
The following information is required to create a license le in the Web License Manager:
• License number and delivery note number of the license
• Product designation
• Serial number of the memory card
The serial number is on the memory card.
Alternative: Copy the serial number from the license overview in the commissioning tool you
are using, and then paste the number in the Web License Manager.
Procedure
1. Call the following link: Web License Manager (
http://www.siemens.com/automation/
license).
2. Click on "Direct access".
The progress indicator shows the "Login" step.
3. Enter the license number and delivery note number of your license. Then click "Next".
The progress indicator shows the "Identify product" step.
4. Enter the serial number of the memory card.
5. Select the product you are using. Then click "Next".
The progress indicator shows the "Select licenses" step.
In the "Already assigned licenses" column, you can see which licenses of a particular memory
card have already been assigned and how often.
In the "Additional licenses to be assigned" column, activate the licenses you want and specify
how many additional licenses you require.
6. Activate the additionally required licenses. Then click "Next".
The progress indicator shows the "Assign licenses" step.
This page shows a summary of the selected licenses for checking.
Functions
14.14Functions that require licensing
SINAMICS G220 converter
730 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB
To Next Page
Loading...
