Siemens SINAMICS G220 - PROFINET Communication; PROFINET IO Fieldbus; Configuring PROFINET IO Operation; Connecting the PROFINET Cable to the Converter

14.4 PROFINET communication
14.4.1 PROFINET IO 󹪝eldbus
Overview
You can integrate the converter into a PROFINET network.
Description of function
1$4VQFSWJTPS
130'*/&5
4*."5*$4
$POUSPMMFS
4*/".*$4(
%FWJDF
Figure14-4 The converter in PROFINET IO operation (examples)
The converter supports the following functions:
• RT (Real-Time)
• IRT (Isochronous Real-Time)
• MRP (Media Redundancy Protocol): Media redundancy, with transition bump
• MRPD (Media Redundancy Planned Duplication): Media redundancy, bumpless.
• Shared device: two di󹪜erent controls access the converter in parallel and independently
• System redundancy S2
• Diagnostic alarms in accordance with the error classes speci󹪝ed in the PROFIdrive pro󹪝le.
• Device replacement without removable data storage medium: The replacement converter is
assigned the device name from the IO controller, not from its memory card or from the
programming device.
14.4.2 Con󹪝guring PROFINET IO operation
14.4.2.1 Connecting the PROFINET cable to the converter
Requirement
You have set up a PROFINET network for connecting the converter.
Functions
14.4PROFINET communication
SINAMICS G220 converter
326 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB