Siemens SINAMICS G220 - Permitted Output Current at Low Speeds

17.8 Permitted output current at low speeds
Technical data
$POTUBOUMPBEJOH
4IPSUUJNFMPBEJOH
0VUQVUGSFRVFODZ<)[>
1FSNJTTJCMF
SFMBUJWFPVUQVU
DVSSFOU<>









Figure17-7 Permitted output current at low speeds
The permissible relative output current is the quotient of the permissible output current and
the rated output current.
Explanation of terms:
• Constant loading is an operating state that is permissible for the entire operating time.
• Short-time loading is an operating state that is permissible for less than 2% of the operating
time.
Technical data
17.8Permitted output current at low speeds
SINAMICS G220 converter
814 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB