Siemens SINAMICS G220 - Page 315

Procedure
Proceed as follows to select or deselect whether changes are automatically saved:
Figure13-8 Saving changes
1. In the navigation bar, navigate to the "System" menu.
Con󹪝rm the selection using the "OK" key.
2. Select the "Settings" menu item.
Con󹪝rm the selection using the "OK" key.
3. Select menu item "Web server".
Con󹪝rm the selection using the "OK" key.
4. Con󹪝rm menu item "Autosave" using the "OK" key.
5. Select one of the following menu items "Autosave"
– On
– O󹪜
Con󹪝rm the selection using the "OK" key.
Operation and monitoring with SINAMICS SDI Standard
13.5Functions
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 313