Siemens SINAMICS G220 - Page 171

3. Release the screw for the ground connection and remove it.

4. Place the housing cover with the recess at the converter housing and swivel the housing
cover downward.
5. Using a torx screwdriver, tighten the 󹪝xing screws of the housing cover. Tightening torque:
2Nm(17.7lbfin).
Connecting
7.1Line system, motor and braking resistor
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 169