Siemens SINAMICS G220 - Page 251

The function view shows the following:
• Parameter list
Depending on the setting in the "System" menu > Settings, the parameter list shows either
all parameters or just the standard parameters.
• User-de󹪝ned parameter list (optional)
– The user-de󹪝ned parameter list contains selected parameters and is created using the "+
Create list" tab.
– "Setup_functions" parameter list
The "Setup_functions" parameter list is intended for parameters that can only be
con󹪝gured with the converter in commissioning mode. It is not currently possible to
access these parameters from the advanced setup menu. Suggestions are contained in
the factory setting.
Additional parameters can be added to the parameter list. This allows uniform access to
the parameters of a drive function, for example.
Starting the advanced setup automatically activates commissioning mode.
So that the user-de󹪝ned parameter list can be used during advanced setup, it is created
and managed with the name "Setup_functions".
You can 󹪝nd more information in Chapter "User-de󹪝ned parameter list (Page250)".
The parameter list o󹪜ers the following options:
• Toggling between two list views
– Show as "Simple view" and "Advanced view" with parameter numbers
• Searching parameters
– Search by parameter number or text search within parameter names
• Filtering the parameter list
– Parameter groups: Only show the parameters that are assigned to a particular function.
– Parameter types: display and/or adjustable parameters
• Changing parameter values directly in a parameter list
– Exception: blocked parameters
p Adjustable parameters Are read/write.
The adjustable parameter can only be parameterized in the ac‐
tive commissioning mode.
Depending on the parameter, changes are possible in the quick
setup or Safety Integrated commissioning.
The adjustable parameter can only be parameterized when the
user has the appropriate function rights.
r Display parameters Can only be read and cannot be edited.
c Display parameters Can only be read and cannot be edited.
Commissioning (web server)
10.5Functions and menus
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 249