Siemens SINAMICS G220 - Page 262

• Scenario 3: The originally con󹪝gured drive password is modi󹪝ed.
1 2 3
$SFBUFCBDLVQ꫼MF3FTUPSFESJWFEBUB
0SJHJOBMMZDPO꫼HVSFEESJWFQBTTXPSE
4VCTFRVFOUMZDIBOHFEESJWFQBTTXPSE
$POWFSUFS"$POWFSUFS"$POWFSUFS"
୫$IBOHFQBSBNFUFS
WBMVFT
୫$IBOHFESJWF
QBTTXPSE









– Press the "Restore" button.
– Enter the drive password con󹪝gured in step 2.
The drive password con󹪝gured in this step di󹪜ers from the drive password with which the
drive data in the backup 󹪝le was encrypted.
– Enter the drive password that was used to encrypt the drive data in the backup 󹪝le.
– The converter takes the drive data from the backup 󹪝le.
The settings at the time of the backup are restored.
Function "Drive data encryption" is activated.
The originally con󹪝gured drive password is applied.
The drive password con󹪝gured in step 2 is then overwritten.
• Scenario 4: Before restoring, all user-de󹪝ned settings for the converter are reset to the
factory settings and a drive password is con󹪝gured.
1 2 3
$SFBUFCBDLVQ꫼MF
3FTUPSFESJWFEBUB
0SJHJOBMMZDPO꫼HVSFEESJWFQBTTXPSE
$POWFSUFS"
$POWFSUFS"$POWFSUFS"
୫$PNQMFUFMZSFTFU
DPOWFSUFS
୫"DUJWBUFFODSZQUJPO







– Press the "Restore" button.
– Enter the drive password con󹪝gured in step 2.
The drive password con󹪝gured in this step corresponds to the drive password with which
the drive data in the backup 󹪝le was encrypted.
Commissioning (web server)
10.5Functions and menus
SINAMICS G220 converter
260 Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB