Siemens SINAMICS G220 - Page 321

Procedure
Retrieving component information
To go to the start page for the converter on the Siemens Industry Online Support portal,
proceed as follows:
1. In the navigation bar, navigate to the "Support" menu.
Con󹪝rm the selection using the "OK" key.
2. Select the "Component" menu item.
Con󹪝rm the selection using the "OK" key.
3. Select the required component.
Con󹪝rm the selection using the "OK" key.
Component-speci󹪝c data is displayed, for example type, Article No., serial number.
4. Con󹪝rm the default "Scan" icon using the "OK" key.
The QR code with the previously output component information is displayed.
5. Scan the QR code with your mobile device.
You are forwarded to the start page for the converter on the Siemens Industry Online
Support portal.
Operation and monitoring with SINAMICS SDI Standard
13.5Functions
SINAMICS G220 converter
Operating Instructions, 04/2024, FW V6.2, A5E51781573B AB 319